Saving fuel on the car with their own hands. "Ecotop" with their own hands
Most motorists fuel prices by no meansdo not please, but what to do. You need to go. There are several ways to save fuel. Let's see what these methods are, learn the advice of experienced drivers, and also try to make the "Ecotop" with our own hands.
Smooth driving: saving fuel
Gasoline is the source of energy for the car.Everyone knows this, and the next question is more complicated. How is energy spent on a specific car? Most of the energy received from the combustion of the air-fuel mixture is expended on overclocking. There is one rule that is used by experienced drivers. The more actively you want to disperse the car, the more energy you will spend.
If you braked sharply, then the entire force thatthere is at the moment, instantly turn into heat. Thermal energy is generated from the friction of the pads and brake discs. It turns out that inhibition is a force that goes into the air.In order not to expend energy in vain, you need to smoothlyaccelerate the car and also brake. It will also be useful to learn a smoother ride. This skill will favorably favor you in the eyes of more experienced drivers. After all, experienced car owners use aggressive braking only in the rarest of cases.
Also, in order to save car fuelwas maximum, you need to unload the trunk. Extra weight is an extra expense of energy. So get everything out of the trunk that you do not need at the moment. So you will reduce the consumption a little.
It is necessary to understand how fuel is spent.In addition, that the energy from combustion is used to disperse, also part of it is spent on overcoming air resistance. Gasoline here is spent in a quadratic dependence. That is, if you decide to overclock your car in half, then the gasoline consumption will increase 4 times.
If you maintain a slow speed, for example incity, the motor will run for a long time. At the same time, the expense is still inevitable. In order to save money, find the optimum speed for yourself. It is at such optimum speeds - from 60 to 100 km / h - you can achieve good results. And this is already saving fuel on the car with their own hands.
However, the problem is not only in the air.For example, when the car has entered a serious puddle, the speed of your car will fall instantly. Also, this should be remembered when riding in the rain or downpours. Although you can not feel these losses on the friction, however they do exist and affect the consumption.
We save electricity
Fuel is still spent on productionelectricity. If you need to turn on the interior lighting, climate system and music, then the consumption will increase dramatically by about 40%. This is significant enough. Do not use electricity unless there is a good reason.
The fuel consumption is also affected by the qualitymovement. If you have the opportunity to make the trajectory of traffic more direct, then use it. This allows you to make the speed more smooth. Sometimes a wise decision is to move in a so-called air bag. There is no air resistance.
Open windows can also affect the flow.They create swirls of air. These effects can affect the speed of movement. If the road is of high quality, then you can give a little podkachat tires. So reduces friction with asphalt, and you save. Here such here economy of fuel on the car. Councils really work.
Correct use of the gearbox
When you press the accelerator pedal, trydo it smoothly. Otherwise, there are all risks of perezalivaya motor, and he has not yet gained enough speed. Even experienced car enthusiasts advise to make sure that the transfers are switched on time. It is better to look at the tachometer, not the speedometer. It is advised to keep the revolutions around 1500-3000 revolutions. This is a good fuel economy in the car.
If the engine speed went beyond the level of 3000,then it's better to switch to high gear. If they fall, turn on the low. When the engine is running at excessively low rpm, the pressure in the lubrication system is lowered. So you will not save, but the engine wears out.
Also, a sharp pressure on the gas is fraught with various dangers. For example, some motorists observed cases when the power unit was simply "choked".
Automatic machines, so popular today, do not contributeeconomy. AKPP leads to an increase in consumption by as much as 15%. You need to pay attention to your car, because any breakdown affects the consumption of gasoline.
Fuel economy on the car by own hands: a diesel engine
Cars on diesel - this is in itselfeconomically, but the price of DT also increased. To ride was cheap, you should carefully check the fuel system. You need to constantly fix the problem. The quality of DTs is also important. Quality diesel has the necessary additives, which allow you to slightly reduce the consumption.
A good advice from experienced - timely maintenance and correction of cyclic filing. It must correspond to incoming air volumes.
Fuel economy by yourself: ideas for winter
In order to save as much as possible, it is better not to drive at all. But enough jokes. In winter, fuel consumption becomes much larger, and with this you need to do something, especially when prices grow like mushrooms.
A good car is a guarantee of effective economy
This is a fairly commonplace advice, but still.There are a lot of annoying problems that can affect the flow. Among the most common car owners are sensors that live their lives. For example, a common case is the oxygen sensor. If it is not "in itself", then the computer is misinformed, and the control unit injects more fuel than necessary.
Also you need to regularly change the lubricant. Viscous and old oil leads to increased consumption. It should reduce friction. However, a viscous oil, on the contrary, makes it difficult to move the mechanisms.
Such a fuel economy on the car with their own hands is a very controversial issue. In the auto community there are often heated debates on this topic.
In modern cars with an injector fuel mixtureMeasured by electronics. With the help of chemistry, it is simply impossible to force the electronics to give a large portion of the mixture. The control unit here is guided by the amount of air entering the cylinders.
Therefore, if you are refueling at a normal gas station,about additives you can forget forever. What is offered to motorists as additives today, has only purifying and moisture removal functions. If you refueled with bad fuel, then the fuel burns out inefficiently. Here the additives will be useful. However, special savings from them should not be expected.
Do you want to save - do not drive on a cold engine
Yes exactly.It is believed that this is a real fuel economy with their own hands. Why? Because in the cold, lubricants have a tendency to thicken. Also, savings in cold driving are not conducive to the temperature of the air that enters the combustion chambers. When it's cold outside, the fuel mixture should be more concentrated. So the engine will work more smoothly. When you heat up your motor, the flow rate may well exceed a liter per hour. Now consider how much time the machine needs in the cold before it is warmed up completely? Each warmth in the morning before going to work eats about 200 grams of gasoline. It so seems that 200 grams is nonsense. After winter you will be horrified by the amount spent.
But what about it?The manufacturer claims that in winter it is possible to go without warming up. This is quite dangerous. Modern and technological cars are different only in other fuel system and automatics. Oil also thickens in the frost and does not work as it should. When the car goes without warming up, the power unit receives less of its portion of oil. What does it say? This means that soon such an engine will need a capital repair.
If ideally, then the motor should not get too cold. To do this, special blankets are produced. Well than saving fuel on the car with their own hands?
Instruments that help save money
In addition to these simple tips, you can still usedifferent instruments. To this end, a sufficient number of devices have been developed. Some of them received approval in the community, some are not. Let's take a look at a few adopted and successful technical solutions.
Brown Gas Generator
Even the most technologically advanced ICEs are guilty of the fact thatfuel in them burns not in full, but only by 40%. The remaining 60% fly into the pipe. To save, you need to use some alternative substance together with the fuel mixture.
This substance is hydrogen, and more precisely,then Brown's gas. These devices can be assembled to save fuel by themselves, they are safe in operation, and hydrogen is not at all dangerous. After gas production, it mixes with the combustible mixture and makes combustion more intense.
Swirler for intake
At the heart of this device is the principle of turbulencemixture of fuel and air at the inlet. The swirler, which is mounted under the carburetor, is a fairly simple design. It is a plate with channels for swirling. The device is mounted under an ordinary carburetor. The well has jets, through which air is sucked. So the vortex flow more effectively grinds the drops of gasoline. Thanks to this device, the efficiency of the fuel mixture is significantly increased. Also, the intensity of combustion of fuel increases. This technology was used in the 80's.This device is now offered to drivers as"Ecotop". The design is really very simple. Make "Ekotop" with their own hands is easy. The manufacture will take about 2 hours together with the installation.
How to make "Ecotop"?
To do this, you will need a drawing and the availability of metal cutting machines, as well as skills to work with them.The structure is metallicmilled simpletons, as well as two rings with holes drilled in them. The small choke serves for air supply. That's all. It is possible to make "Ekotop" not from metal, but from plastic. This will be easier on a milling 3D machine. You can also print the device on a 3D printer. And the easiest way to buy it, the benefit of its price - only 700 rubles.According to those who used the device, thisinexpensive and simple way to make the economy really economical. "Ecotop" has already been tested by a large number of drivers. This is an affordable fuel economy on the car, made with your own hands.
As a conclusion
The topic of saving and reducing consumption is actualsubject. And it is relevant not only today, but always. We offer all sorts of additives, various devices that do not work. Beautiful advertising promises almost 100% savings, but often turns the other way. So how to save money? To consume fuel efficiently, you need to take advantage of these tips. So drive millions of drivers with great experience. What is the right fuel economy? Actually, it does not exist. Everyone uses what he uses. Perhaps these tips will help someone to reduce their spending.
So, we found out how to make devices to save gasoline with our own hands.